HomeMy WebLinkAbout0387_382382
2. The Final Plat shall -contain the following information.
ExistingFeaturesInside Subdivision.
a. The existing boundary lines with accurate distances and
bearings of the land to be subdivided. Boundary lines shall be
drawn sufficiently wide to provide easy identification.
b. The location of existing water courses, railroads, and
other similar drainage and transportation features.
c. The one hundred year flood plain, based on fully
developed conditions within the watershed area, shall be shown on
the plat and certified by a Registered Professional Engineer.
d. True bearings and distances to the nearest established
street lines, official monuments, or subdivision corner, which
shall be accurately described on the Plat.
e. The location and width of existing streets, alleys,
easements, rights-of-way, buildings and structures to be
retained.
f. An accurate location of the subdivision in reference to
the deed records of the County which shall include the volume and
page of the property to be subdivided.
3. The Final Plat shall also contain or have attached thereto:
Existing Features Outside Subdivision.
a. The name and property Ines o adjoining subdivisions
and' of the adjoining property owners, together with the
respective plat or deed references.
b. The name and location of adjacent streets, alloys,
easements, water courses, and other required information.
All lines outside of subdivision boundaries to be dashed.
4. The Final plat shall contain or have attached thereto:
Streets Alleys, Easements,
The ocations, approve names and right-of-way widths of all
proposed streets. Locations, dimensions and purposes of any
easements or other rights -of -ways to be dedicated to public use,
with the following engineering data:
a. For Streets. Complete curve data (Delta, Arc length,
Radius, Tangent, Point of Curve, Point of Reverse Curve, Point of
Tangent, Long Chord with Bearing) between all lot corner pins.
b. For Water Courses and Easements. Distances to be
provided along t'he side'�ot—lines from tFie front lot line or the
high bank of a stream. Traverse line to be provided along the
edge'of all large water courses in a Gpnvenient location,
preferably along a utility easement if paralleling the drainage
easement or stream.
5. Lots and Blocks. ,
On the Nnal plat the lines and numbers of all proposed lots
and blocks shall be shown with complete bearings and dimensions
for front, rear and side' lot lines. The surveyor shall, certify
that all lots have an area of 6000 -sq. ft. or more.
6. Reservations.
The lina plat shall show the use, property dimensions,
names and boundary lines of all special reservations to be
dedicated for public use including sites for schools, churches,
parks and open spaces.
7, Monuments and Control Points.
All final plats shat contain:
1. The description and location of all permanent survey
monuments and control points.
29 aSuitable primary control points to which all dimension,
bearings and similar data shall be referred. Dimensions shall be
shown in feet and decimals of a foot.
$. Key Map.
Each final plat shall include a key map showing the relation
of the subdivision to well-known streets in all directions to a
distance of at least one -U) mile using a scale of 1" = 2,0001.
5